Welcome to ChemicalGuys.eu!

 Call Us. +31 (0) 546 456 716 Email Us. info@chemicalguys.eu
Chemical Guys FR
Chemical Guys DE
Chemical Guys NL
Chemical Guys EN

Maintenance Repair Polishers



Maintenance and repair of polishers
Hard work pays off, every professional detailer knows this from experience. To keep up with your work you need good machines and tools to help you with that. Maintenance of this is important.
For example, to keep a polisher in good condition, we recommend cleaning and lubricating it regularly (also behind the backing plate). If extra service is required due to wear or aging, we are happy to help you.
Take care to do this (or have it done) in time to prevent damage (internal). You don't want the consequences of loss of work or loss of turnover, and certainly not because of a broken polisher.

The most common repairs / maintenance are;

Carbon brushes
These are subject to wear and must be replaced.
Characteristicsof complaints are not or not spinning the backing pad optimally with too little power and speed.
A replacement set of carbon brushes can be ordered online and is easy to install yourself.|
If you want us to do that too, please make an appointment.
-> mail to info@chemicalguys.eu or call + 31- (0) 546-456716.



Cable breakage
This occurs regularly, as a result of “tight wrapping” around the polisher
With tension on the cable which can lead to breakage after repetition.
Characteristics are that the machine does not work or that the power "fails".
This is usually a time consuming to detect the break.
If you want us to do that too, please make an appointment
-> mail to info@chemicalguys.eu or call + 31- (0) 546-456716.

Switch
The on / off button (trigger / accelerator) is used a lot, every day, every week, throughout the year.
It may become less contact over time and the polisher no longer functions properly.
A new switch can be ordered from us and is easy to place yourself.
If you want us to do that too, please make an appointment
-> mail to info@chemicalguys.eu or call + 31- (0) 546-456716.



Speed ​​controller
After frequent use, the speed controller can refuse service, it is important that it functions well and you can start slowly at setting 1 to and increase the speed where you need it.
A new switch can be ordered from us and is easy to place yourself.
If you want us to do that too, please make an appointment
-> mail to info@chemicalguys.eu or call + 31- (0) 546-456716.

Axle / rotating parts
A polisher can sometimes fall from a toolcart on the ground (it happens).
The result may be that the polisher makes a cracking noise and the backing plate may have become unbalanced.
Sometimes this can be solved, we inspect the polisher carefully, then we will discuss the parts and working hours with you.
After your order we will proceed to repair, we would like to make an appointment
-> mail to info@chemicalguys.eu or call + 31- (0) 546-456716.

During our repairs we only use original parts to make repairs and to maintain the quality of the machine. Be smart and make an appointment today!