http://nathanlustig.com/?quest=antabuse-nz-pokal Why buy this product?
Easy to use.
Three infrared light tubes.
Use light tube can be switched individually.
Configurable electric timer up to 99 minutes.
Easy to move and lock because of the ball bearing rollers with brakes.
Make drying quickly and easy. The infrared light tubes with 1100 watt each is drying faster than ever. With a drying time up to 10 minutes, you never have to wait anymore. Short wave heat dries the paint from the inside to the outside. The infrared dryer can be adapted to the requirements of the drying from the front. It is also possible to enable each light individually. The dryer has a drying surface of 1200 x 1000mm. The wheels underneath the frame make the infrared dryer easy to move. The 300AX has a stabile aluminum construction with hydraulic arm for easy lifting. The device weights 49 kg.
side effects wellbutrin while drinking alcohol Perfect for Paint Coatings!
Many paint coatings like the N-XTC Quartz, Second Skin or the Carbon Flex C9 have a disadvantage because the first 12 hours after application it may not be exposed to rain or any other moisture. With the IR Paint Protection Coating Dryer you can reduce the drying and curing time to a minimum. It takes 10 to 15 minutes per panel with the IR Paint Protection Coating Dryer which normally can take 12+ hours. It is perfect for professional detailers with limited space who cannot have a car for a minimum of 12 hours just standing there occupying the working - space.
The gold coated infrared lights are made of high quality quartz tubes (Ruby Red). Quartz glass is very pure and provides good transmission and temperature resistance. The gold coating on the infrared emitters reflects the IR radiation. The effective radiation on the product is virtually doubled. With the models of the 300AX series you have the possibility to adjust each of the 3 lamps individually by 360°. The models of the 300 series have a rigid lamp housing.
things to avoid while taking antabuse Warning: Be careful with plastic panels! The extreme heat can deform or even melt plastic panels.
|colchicine taken with naproxen Specifications|
|Capacity||3 x 1100W|
|Temperature||80~100°C at 30cm to 50cm|
|Consumption||3x 1,1 KWH per hour|
|Drying surface||1200 x 1000mm|
|Timer||0-99 min (configurable)|
|Cable length||5 meter|
Spectratek, Spectratek 2400S, Spectratek 2400 S, Spectratek 3400S, Spectratek 3400 S