Revive Reshine Rethink
Get it done in 1/2 the time with Twice the Shine.
Imagine a Premium Glaze that cleaned and revived paint while maximizing depth and clarity in one pass.....Imagine No More Revive is Here.
Use Chemical Guys Revive Glaze after an application of Laser Buff, Spider or and Compound to achieve a perfects finish or simply to amplify the smooth wet shine and perfection of any job.
Revive Glaze is designed for application by hand or with a dual Action polisher or high speed polisher.
If using a dual action polisher, set the maximum speed between 4500 and 5000 OPM.
If using a circular polisher, do not exceed 1500 RPM. Use a Blue or White HEX LOGIC BUFFING PADS.
Apply small amount of glaze to the pad 3 to 4 dots is enough.
Spread it over about a 2 square foot section with the polisher turned off to avoid splatter.
Turn the polisher on and work the glaze into the paint until the glaze is nearly dry.
Buff off the glaze with a Microfiber buffing towel.
Work in this manner until you’ve glazed the entire vehicle.
Always follow up with M-Seal Paint Sealant or for maximum protection use Jetseal 109 and
Ideally a nice coat of 5050 Paste Wax to lock in the depth of shine.