TORNADOR CLEANING GUN BLACK Z-020 (Z 020)
Why buy this product?
About the Tornador Z-020
The Tornador Black has newly developed rotational technology inside the funnel to provide faster, more powerful cleaning compared to the Tornador Classic. Professional detailers will love the speed and effectiveness of the Tornador Black. The new design reduces wear and ensures a longer life and superior performance.
The designers increased power but reduced air consumption and noise. Plus, the Tornador Black is equipped with sealed ball bearings inside the rotation set. Wear is minimized because the rotation set no longer comes into contact with the cone. This improvement makes the Tornador Black better suited for long term, frequent use, as in a professional detailing capacity.
The Tornador Black produces enormous power with a very small air compressor. All you need is a compressor with a discharge rate of at least 270 l per minute (9.55 cfm). This can be achieved using compressors with a reservoir of as little as 50 l capacity. Mobile detailers can now use the Tornador Black with a smaller, portable air compressor.
The Tornador Black Car Cleaning Gun releases a fine mist of cleaning solution that does not over saturate surfaces. You`ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It`s that simple.
For interior and exterior
Use the Tornador Black on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. The Tornador cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly.
How to use
The Tornador Black can be used for all the same applications as the Tornador Classic, but the Black is more effective on persistent spots, like chewing gum. To clean any surface, dilute the desired cleaner (All – Clean) according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the Tornador Car Cleaning Tool over the surface. If necessary, allow the cleaning liquid (All – Clean) to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area.
|Air – Pressure||6 - 8 Bar|
|Air – Consumption||245 L/MIN|
|A weighted emission sound pressurel (LpA)||92.66 dB (EN ISO 15744)|
|A weighted sound power level (LwA)||103.65 dB (EN ISO 15744)|
|Peak – C – weighted Spitzenschalldruck (LpC)||96.5 dB (EN ISO 15744)|
|Vibration Level||3.9 M/SEC2 (EN 28662-1)|
|Measurement Uncertainty (Standard)||1.95 M/SEC2 (EN 28662-1)|
|Warranty||1 year, except the parts that wear|
|Name||TORNADOR CLEANING GUN BLACK Z-020 (Z 020)|